SONALI 91 CM (36 Inch) Guide Bar, 46 RMX Ripping Chainsaw SPL070

The most popular livelihood chain saw designed for harvesting, felling, trimming and all commercial and forestry applications, SONALI 90 cm (36 Inch) guide bar, 46 RMX ripping saw chain.

Features:

SONALI ElastoStart

Due to compression pressure, jerky stresses occur when starting internal combustion engines. The damping element in the ElastoStart special starter grip alternately absorbs and releases force according to the compression pattern. The result is smooth, even starting.

SONALI 2-MIX engine

The two-stroke engine with SONALI 2-MIX technology saves up to 20 % of fuel and reduces emissions by up to 70 % compared to SONALI 2-stroke engines of the same performance class without 2-MIX technology.

Electrically heated handles (W)

The electrically heated handles (W) keep your hands warm and dry for a better grip, making your work safer in winter. No-maintenance, wear-free heating strips in the front and rear handles can be engaged with a switch as required to make the handle warmer and dryer.

SONALI M-Tronic (M)

For a cold start, the SONALI M-Tronic only needs one start position on the combi-lever. After starting, you can immediately power up to full speed. The amount of fuel required is precisely calculated by the system and supplied as needed. Otherwise, start in position I as usual.

Side-mounted chain tensioning

Side-mounted chain tensioning makes it easy to tension the chain safely.

SONALI anti-vibration system

Precisely calculated buffer zones minimize the transfer of engine and saw chain vibrations to the front and rear handles. The chainsaw therefore runs noticeably smoother. This allows the user to save their strength and work longer.

Compensator

This controller in the carburetor prevents the fuel-air mixture getting richer as the air filter becomes clogged. The correct quantity of fuel is delivered to the carburetor depending on the quantity of air passing through the air filter. This keeps the fuel/air ratio in the combustion mixture constant and hence also the engine power. The filter doesn’t need to be cleaned until an appreciable drop in power occurs.

Decompression valve

The decompression valve is part of the easy starting system. The valve should be pressed before starting to reduce the compression pressure when starting, as well as reducing the effort needed to pull the starter rope. The decompression valve is semi-automatic; it must be pressed manually before starting, but then closes automatically.

SONALI Ematic System

Compared to conventional bars without Ematic, the SONALI Ematic system reduces the consumption of chain lubricant by up to 50 %, depending on the type of wood and the cutting attachment used. This system comprises a SONALI Ematic or Ematic S guide bar, a SONALI Oilomatic saw chain and a variable-flow or reduced-flow oil pump. As a result, virtually every drop of chain lubricant is delivered to exactly the right spot.

HD2 filter

This air filter keeps even the finest dust away from the engine, ensuring a particularly long service life. Thanks to its special material, the filter can easily be cleaned by washing, for example with SONALI Varioclean and warm water.

Combi lever

As M-Tronic has electronic cold and warm start recognition, only one start position is needed on the combi lever. The exact amount of fuel is supplied on demand. You do not need to know about the status of your chainsaw and can apply full throttle straight away – even with a cold start. Because the saw is warmed up by optimum acceleration in a few seconds.

Captive nuts

When changing the cutting attachment, you will not risk losing the nuts on the sprocket. The MS 261 is the first SONALI chainsaw to be equipped with the captive nuts. A great advantage for all users.

Tool free fuel caps

Special caps to open and close the tank cap quickly, easily and without tools.

Accessories you will get

Multi-function tool

Practical, multi-function quality tool in a sturdy plastic case. 3.5 mm flat-blade screwdriver for carburettor adjustment and cleaning grooves, Torx® TX 27 screwdriver, nylon pouch with belt loop. Width across flats 19-13 for MS 271, MS 291, MS 311 and MS 391, width across flats 19-16 for MS 170, MS 171, MS 180, MS 181, MS 193 C, MS 211, MS 231, MS 241 and MS 251.